Premium RV LED Camper Awning Boat 16' Light Set with 20 Key RF Remote RGB 16' ft Waterproof

$67.59 $62.93


This strip can be mounted in many places; Use it for under cabinet or foot board lighting. Accent walls, hard to reach cubby holes and tables. Select the location where you want to mount the light, take in account how you want to get the 12 volt power to this strip. We suggest starting the wire end of the strip near a power source. Clean the mounting surface with rubbing alcohol. Remove the 3M backer and install end to end. Please be careful and plan ahead, this channel will not come off once it has been applied. Remove the 3M backer from the LED strip, then apply. Connect the Strip light wire lead to any 12V or 110v switched source and enjoy your new LED lights for 50,000 plus hours. Note: This is very easy for any DIY to do.

  • 1 x 16′ Pc. of 5050 Waterproof LED strip light w/Wire lead. This LED Light strip is RGB which can switch from blue, green, red and any combination of the colors to create tons of different color combinations.
  • 1 x 17 key RF wireless remote control with color changing capability and different flashing and strobing modes. Change from a cool subtle color change or a fast and vibrant strobe effect. 5050 LED light strip comes the multi chip that can do thousands of different color configurations.
  • RF Remote uses radio frequency so you don’t need a line of site. Can be used through walls, etc.
  • 1 x US standard house plug for 12V wall outlet