CAMPER LEVELER BY ANDERSEN HITCHES – THE ORIGINAL DRIVE-ON LEVELER
Does STRUGGLING to level your RV, camper, motorhome, or trailer TAKE THE FUN out of your first day at the campsite?
End up in arguments? Uh-oh….. (you know who you are)…..
Lots of folks lug wooden leveling blocks with them everywhere they go, but they’re a pain to pull out, to drive off, on, off on, off on to get the leveling just right… and they can get mildewy, rotten, or crack.
What about plastic building blocks?
Well… they may or may not hold up a little longer, but you certainly can’t fine-tune your leveling on the fly!
Treat yourself to the ORIGINAL leveling system, the Andersen Camper Leveler Kit, that fine-tunes your leveling in 1″ to 4″ increments ON THE FLY.
Simply drive up until you are level and then chock – it really is that simple! No more guesswork! No more hassle!
Push the skinny end of the camper leveler right into the tire as far as you can push it. Make sure it is really tight. Be sure to do this with all camper levelers you are using!
Using a bubble level (or whatever means you have) to determine when you are level, have one person driving and the other watching the level.
Tip: It’s helpful to put your truck in low 4-wheel drive and take it slow!
The driver slowly drives onto the levelers, and the person who is watching the level hollers when the trailer is level.
Some people use walkie-talkies to communicate when the trailer is level. It’s also possible to do this yourself if you have a level on your trailer big enough to see in your rearview mirror.
If you can, you should go just a TINY bit past when you are level so that when your truck settles you’ll be just right! Stop, chock… and you’re done!